NOTE
Quick search
If you perform a fast search, the RouterNode will only send a single broad-
cast. If you perform a regular sweep, the RouterNode sends a total of six
broadcasts. The quick search is completed faster, but the normal scan is
more thorough and finds LockNodes that were not reached during a quick
search.
9 The "WaveNetManager" window closes.
9 The "Procedure started" window opens temporarily.
9 The window "Search results" opens.
You will see an overview table of the LockNodes found by the RouterNode
during the search. This table has three columns:
Nodes in this segment
Nodes from other seg-
ments
New nodes
These LockNodes are
located in the WaveNet
topology and are
already assigned to the
RouterNode.
These LockNodes are
located in the WaveNet
topology, but are as-
signed to a different
RouterNode.
These RouterNodes are
not not in the WaveNet
topology.
Each column contains two sub-columns:
WaveNet (Manual)
5. WaveNet Manager
149 / 210
To Next Page
Loading...