5.5.2.2 LockNodes
Restarting LockNodes in the WaveNet Manager
ü WaveNet Manager opened via LSM (see
Best Practice: From the LSM
software [}37]
)
ü LockNode connected to WaveNet (see
Adding Lock Nodes to WaveNet
[}59]
).
1. Right-click on the entry of the LockNode you want to restart.
9 The window "Administration" opens.
2. In the area "Maintenance" select the option Restart.
3. Click on the OK button.
9 The "Procedure started" window opens temporarily.
WaveNet (Manual)
5. WaveNet Manager
153 / 210
To Next Page
Loading...