SimonsVoss WaveNet - Page 201

 Status of the network connection (matrix)
 Locking device status (DoorMonitoring) (Matrix or Smart.Surveil)
 Battery warning of the locking device with LockNodes via warning
monitor (|Reports|
- Warning monitor ), see LockNodes [}184] . To use
it effectively, a task for testing the battery status must be set up using
the Task Manager. This function is only available in LSM Business/
Professional.
Use the button to refresh the view.
Show network and door monitoring status
The network connection status is not displayed by default. Activate the
network status display as follows:
ü LSM open.
1. Via |View| select the entry Additional columns and there Locking
devices/doors .
9 The window "Additional data: Door" opens.
WaveNet (Manual)
7. Signalling the operating status
201 / 210