Chapter 4. Manually Programming IDNet Points
4-8
The right and left arrow keys allow you to move the focus
brackets to a different alarm group, while the <NEXT> and
<PREV> keys allow you to select the desired group number.
Pressing <ENTER> will accept any changes made and exit,
and the <EXIT/CLEAR> key will quit the alarm group edit
without saving.
Deleting an IDNet Point
This menu selection allows you to manually delete a specific
IDNet device from the job configuration. All programming
associated with that point (e.g. Annunciator programming)
will also be deleted.
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
