Simplex 4008-9101 - Page 62

Chapter 6. Manually Programming Annunciators
6-4
Note: Do not program Point 2 (Common Trouble LED
or Point 18 (Comm Loss) on the LED/Switch Annuncia-
tor.
Programming the LED’s Mode and Reference Point
An LED’s mode allows you to specify which point is being
monitored by the LED (called the reference point) and what
point state triggers the LED to turn on. For example, you can
associate an LED with a smoke detector point and have the
LED turn on only when the point enters a trouble state.
1. Follow the steps in “Accessing Annunciator Menus”
earlier in this chapter. Choose LED as the type of
device to program.
Table 6-1 Default LED Assignments,
Local Zone LED Module
LED/Color Default Function
Default Reference
Point
1 TROUBLE Alarm Group 9
2 TROUBLE NAC2
3 FIRE Alarm Group 8
4 TROUBLE Alarm Group 1
5 FIRE Alarm Group 2
6 TROUBLE Alarm Group 2
7 FIRE Alarm Group 3
8 TROUBLE Alarm Group 3
9 FIRE Alarm Group 4
10 TROUBLE Alarm Group
11 FIRE Alarm Group 5
12 TROUBLE Alarm Group 5
13 FIRE Alarm Group 6
14 TROUBLE Alarm Group 6
15 FIRE Alarm Group 7
16 TROUBLE Alarm Group 7
17 FIRE Alarm Group 99
18 TROUBLE Alarm Group 8
19 FIRE Alarm Group 9
20 TROUBLE Alarm Group 99
21 TROUBLE NAC 1
22 FIRE Alarm Group 1
23 TRBL NAC 3
24 TRBL NAC 4
Table 6-2 Default LED Assignments, Remote LED/
Switch Module
Point Type
Default
Function
Default
Reference
Point
1 Tone-Alert
PIEZO (tracks state
of main piezo)
none
2 Yellow LED
General Trouble (illu-
minates on any trou-
ble).
none
4 Red LED FIRE
Alarm
Group 3
5 Red LED FIRE
Alarm
Group 4
6 Red LED FIRE
Alarm
Group 5
7 Red LED FIRE
Alarm
Group 6
8 Red LED FIRE
Alarm
Group 7
9 Red LED FIRE
Alarm
Group 8
10 Red LED FIRE
Alarm
Group 9
11 Yellow LED TROUBLE.
Alarm
Group 99
12 Yellow LED TROUBLE
Alarm
Group 1
13 Yellow LED TROUBLE
Alarm
Group 2
14 Yellow LED TROUBLE
Alarm
Group 3
15 Yellow LED - TROUBLE
Alarm
Group 4
16 Yellow LED - TROUBLE
Alarm
Group 5
17 Red LED - FIRE
Alarm
Group 99
18 Yellow LED - none none
20 Red LED - FIRE
Alarm
Group 1
22 Red LED - FIRE
Alarm
Group 2
Table 6-2 Default LED Assignments, Remote LED/
Switch Module
Point Type
Default
Function
Default
Reference
Point
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com