B-1
Table B-1: Contact ID Default Values
Description Contact ID
Event Code
Device 1 through
Device 200
GRP:01 ID:001 through
GRP:01 ID:200
Based on device
function type
NAC 1 GRP:01 ID:201 *
NAC 2 GRP:01 ID:202 *
Expansion NAC 1 GRP:01 ID:203 *
Expansion NAC 2 GRP:01 ID:204 *
Aux Relay 1 GRP:01 ID:205 *
Aux Relay 2 GRP:01 ID:206 *
AC Power GRP:01 ID:207 Trouble 301
Aux Power GRP:01 ID:208 Trouble
EPS Aux Power GRP:01 ID:209 Trouble
EPS AC Fail GRP:01 ID:210 Trouble 301
EPS Battery GRP:01 ID:211 Trouble
Earth GRP:01 ID:212 Trouble 310
Low Battery GRP:01 ID:213 Trouble 302
Battery Depleted GRP:01 ID:214 Trouble
Low Battery Cutout GRP:01 ID:215 Trouble
Charger Trouble GRP:01 ID:216 Trouble
EPS Configuration Mismatch GRP:01 ID:217 Trouble
Manual Test Report GRP:01 ID:233 Test 601
DACT Phone
Line 1 Trouble
GRP:01 ID:233 Trouble 351
DACT Phone
Line 2 Trouble
GRP:01 ID:234 Trouble 352
24hr Test Report, Off Normal GRP:01 ID:235 Test 602, 608
Extra Card GRP:01 ID:236 Trouble
Appendix B. Contact ID Default Values
*Any other trouble not specifically mentioned would have a code of 330.
For example, a trouble on an output device would report an event code of 330.
Continued on next page
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
