3-1
The CCDACT is programmed in one of three ways:
• Using a laptop computer operating with terminal emulation software
• Using a “dumb” terminal
• Using a hand-held terminal
The following device is recommended as the hand-held terminal:
• QSI Corporation (801/466-8770) Model QTERM-II Data Entry Terminal
with REGULATOR and (0589) CABLE options. This device may require
the following adapters:
DB9 (Male-Male) Gender Changer - LCOM
1
DG89M (or equivalent)
DB9 Null Modem - LCOM DMA060MF (or equivalent)
This chapter contains the following topics:
Topic Page
Starting the Programmer 3-2
Navigating the Programmer 3-3
Programming the CCDACT 3-4
Exiting the Programmer 3-19
Custom Control Programming 3-20
Service and Maintenance 3-23
Chapter 3
Programming
Overview
Topics
___________________________________
1
To contact LCOM, dial 800/350-5266.
To Next Page
Loading...
