Simplex Contact Closure DACT - Report Code Command Screen; Help Command Screen; Figure 3-2. Report Code Command Screen; Figure 3-3. Help Command Screen

3-18
To display the Report Code Command Screen, at the C> prompt, type RC. Then
press [↵] or [↓]. Note: If you need to get to the C> prompt, press ESC.
Figure 3-2. Report Code Command Screen
To display the Help Command Screen, at the C> prompt, type HELP. Then
press [↵] or [↓]. Note: If you need to get to the C> prompt, press ESC.
Figure 3-3. Help Command Screen
Programming the CCDACT, Continued
Report Code Command
Screen
Help Command Screen
firealarmresources.com