Simplex Contact Closure DACT - Page 38

3-8
10. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
11. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
12. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
13. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
14. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
15. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
16. Press [↵] or [↓]. Screen displays:
Scroll to the choice that identifies the phone lines(s) you want to use to
report this condition.
Continued on next page
Programming the CCDACT, Continued
Programming (Continued)
10>ST PRIORITY2
[P1 ELSE P2]
11>ST SUPERVISORY
[P1 ELSE P2]
12>ST TROUBLE
[P1 ELSE P2]
13>ST ALARM RESTORE
[P1 ELSE P2]
14>ST PRI2 RESTORE
[P1 ELSE P2]
15>ST SUPERV RESTORE
[P1 ELSE P2]
16>ST TRBL RESTORE
[P1 ELSE P2]
firealarmresources.com