Simplex Contact Closure DACT - Page 56

3-2
P
Power indicator, 1-5
power requirements
4004 CCDACT, 1-3
4005 CCDACT, 1-3
4020 CCDACT, 1-4
4100 CCDACT, 1-4
4120 CCDACT, 1-4
Priority 2 phone line programming, 3-8
Priority 2 report code, 3-12
Priority 2 Restore phone line
programming, 3-8
Priority 2 Restore report code, 3-13
programmer
AC Fail phone line, 3-9
AC Fail Report Delay, 3-10
AC Fail Restore phone line, 3-9
account number, 3-7
Alarm phone line, 3-7
Alarm Restore phone line, 3-8
Answer Ring Count, 3-11
Auto Comm Test phone line, 3-9
Auto Test Report Time, 3-10
basic use, 3-3
Comm format, 3-4, 3-5
defaults, 3-17
Dial Delay, 3-11
Dial Mode, 3-11
exiting, 3-19
help, 3-18
Manual Comm Test phone line, 3-9
Monitor phone lines, 3-10
Off-Normal Test phone line, 3-10
Priority 2 phone line, 3-8
Priority 2 Restore phone line, 3-8
Pulse Dial Ratio, 3-12
Pulse Format Rate, 3-11
Pulse Frequencies, 3-11
report codes, 3-12
saving changes, 3-19
settings, 3-17
starting up, 3-2
Supervisory phone line, 3-8
Supervisory Restore phone line, 3-8
telephone number, 3-4
terminals, 3-1
time/ date, 3-4
Trouble phone line, 3-8
Trouble Restore phone line, 3-8
Pulse Dial Ratio programming, 3-12
Pulse Format Rate programming, 3-11
Pulse Frequency programming, 3-11
R
receiver listing, 3-6
report code programming, 3-12
report codes
AC Fail, 3-15
AC Fail Restore, 3-15
Alarm, 3-12
Alarm Restore, 3-13
Auto Comm Test, 3-16
Line 1 Trouble, 3-14
Line 1 Trouble Restore, 3-14
Line 2 Trouble, 3-15
Line 2 Trouble Restore, 3-15
listing, 3-18
Manual Comm Test, 3-16
Off-Normal Test, 3-16
Priority 2, 3-12
Priority 2 Restore, 3-13
Supervisory, 3-13
Supervisory Restore, 3-14
Trouble, 3-13
Trouble Restore, 3-14
Revision 1.01.01 firmware, 2-2
Revision 1.03.01 firmware, 2-2
RJ-31X jack, 1-3
S
Supervisory phone line
programming, 3-8
Supervisory report code, 3-13
Supervisory Restore phone line
programming, 3-8
Supervisory Restore report code, 3-14
T
telephone lines
connecting to, 1-3
information for telephone
company, 1-2
telephone number programming, 3-4
testing the CCDACT manually, 3-9
time/ date programming, 3-4
Trouble indicator, 1-5
Trouble phone line programming, 3-8
Trouble report code, 3-13
Trouble Restore phone line
programming, 3-8
Trouble Restore report code, 3-14
I-2
firealarmresources.com