7 Transmission Repair
7C Tuff Torq K60
7 - 44
5. Loosen the seat supports and slide the fuel tank for-
ward.
NOTE: The fuel line does not have to be disconnected.
6. Remove the fan from the input shaft pulley.
Figure C–5. Moving Fuel Tank Forward, and
Removing Input Shaft Fan.
TUFF TORQ K60 HYDROSTATIC
TRANSMISSION REPAIR
Removal
1. Place drain pan under transmission. Remove drain
plug at bottom of differential housing. Replace seal
washer on drain plug before reinstalling.
2. Remove the seat deck. (See Seat Deck Removal)
3. Elevate the rear end. (See Elevating Rear End for
Safe Service)
4. Remove the rear wheels. (See Rear Wheel
Removal)
Figure C–4. Draining Transaxle
To Next Page
Loading...
