SimpliVity OmniStack - Altitude; Vibration and Shock; Agency Compliance; About Hardware Upgrades

Chapter 1: Hardware overview 19
Specification Description
Temperature (non-operating, in storage) –40 to 149°F (–40 to 65°C)
Humidity (operating) 10 to 90%
Humidity (non-operating) 5 to 93%
Altitude
Each UCS C240 M4SX server has specific altitude limitations when operating or in storage.
Specification Description
Altitude (operating) 0 to 10,000 ft
Altitude (storage) 0 to 40,000 ft
Vibration and shock
A UCS C240 M4SX server configured for deployment in a SimpliVity Federation does not exceed the
vibration and shock limit specifications for a fully-configured enclosure.
Agency compliance
A UCS C240 M4SX server, when configured for deployment in a SimpliVity Federation, meets the same
compliance standards as a standard Cisco UCS C240 M4SX server.
About hardware upgrades
If you would like to upgrade the server hardware components, contact Customer Support.
Note:
Never install additional options other than those approved for installation by Customer Support. Doing
so will void your warranty and might cause serious server instability and potential data loss.
About firmware revisions
The OmniStack software requires that each supported platform is running a specific firmware revision.
To avoid compatibility issues, contact Customer Support before making any firmware changes.
Note:
If your server, or any management software, has automatic software updates enabled, disable this
feature to avoid installing unsupported firmware revisions.