CR40/42/50 MKII Chart menus and INFO windows Chapter 3
34
TRUE
motion – The ‘ship’ will move across the chart.
RELATIVE
motion – (Chart area will default to
MEDIUM
). The ‘ship’ is
locked to the center of the screen and the chart will move.
Rotation resolution can be set to adjust the chart for each 5, 10, 15, 20
or 25° changes in present course or heading.
Depth – Level 1, 2 and 3 are identified by different colors. The number
of meters in the levels can be changed. The colors are preset in the
Palette setup, section 8.2.6.
Grid the LAT/LON grid can be set AUTO/ON/OFF. The color of the
grid is preset in the Palette setup, section 8.2.6.
Show scale ON will add a small line to the chart display indicating that
the length of the line equals a certain number of nautical miles/km.
Auto chart select When sailing with “Auto chart select” ON and cursor
turned OFF, the scale will automatically change to the chart which is
available. But when set to OFF, then the selected scale will remain,
also when sailing “out of the chart”.
Extended level range ON will provide a higher level of chart details
when zooming in and out of scales.
The rest of the objects in the chart setup, from Non active waypoints
and down to the last line Target names can all be:
ON = shown on chart or
OFF = not shown on chart, or
AS SELECTED = which means that the choice of having a certain
route shown on the display can be made via the menu e.g.
[MENU], [3]
WP/RTE, [2]
Routes and
[ENT]
– where Course line can be set ON or
OFF.
To Next Page
Loading...
Need help?
General
