Simrad CR50 MKII User Manual

CR40/42/50 MKII Waypoint/route menus Chapter 5
57
ENT
Call up the Edit line display - if you wish to make any changes.
Edit line:
Name: FISHING BORDER
Line: ON
Turning
“Line” OFF
will make
the line
drawing
invisible on
the screen.
Putitback
on the screen
by turning it
ON again.
WIN
Delete
MENU
Exit
ENT
Accept
Place the cursor on the function you wish to change i.e. name, line type
or color
+/-
Toggle between available values
ENT
Confirm entry
5.4.1 Delete lines via menu
MENU
Call up the menu bar, and…
3,4
load line display
+/-
Select the line you wish to delete
ENT
Press
[ENT]
to open for editing
WIN
Press [WIN] to delete the line
CLR
Confirm
) Edit lines directly on the chart via info windows. Refer to section
3.3.4 and 3.3.5.

Simrad CR50 MKII Specifications

General

GPS	Yes
Chartplotter	Yes
Sonar	Yes
Type	Color LCD
Power Supply	10-32 V DC
Operating Temperature	-15°C to +55°C
Frequency	50 kHz, 200 kHz
Display	Color LCD
Operating Voltage	10-32 V DC