Simrad CR50 MKII User Manual

CR40/42/50 MKII Waypoint/route menus Chapter 5
52
5.1.1 Delete waypoints via menu
MENU
Call up the menu bar, and…
3,1
load WP list
+/-
Select waypoint you wish to delete
ENT
Press
[ENT]
to open for editing
WIN
Press [WIN] to delete waypoint
CLR
Confirm entry and return to WP list
) Edit waypoints directly on the chart via info windows. Refer to
section 3.3.3.
5.2 Routes stored in the memory
The route list will keep a record of all the saved routes in the system.
It will provide information on number of waypoints in the route, etc.
) To make new routes you need a chart in the active window, place
the cursor where you wish to place the first routepoint, and press
[PLOT].
Then follow the instructions in the info windows. Refer to
section 3.3.9.
To delete a route, refer to section 5.2.1.
Routes can also be edited directly on the chart via info windows. Refer
to section 3.3.4 and 3.3.5.
MENU
Call up the menu bar, and…
3,2
load route display
- see example next page.

Simrad CR50 MKII Specifications

General

Brand	Simrad
Model	CR50 MKII
Category	Marine Equipment
Language	English