CR40/42/50 MKII Waypoint/route menus Chapter 5
54
invisible on the screen. Put it back on the screen by turning it ON
again. The course line and XTE line can be changed in color – there
are a total of 14 colors to choose from, and 9 different line types.
If the XTE distance is not the same in all legs, the value will be *.*
instead of the 0.10nm. Navigation mode can be either
RHUMBLINE
or
GREAT CIRCLE
,or….ifnotsettothesameinalllegsinaroute,the
mode will be:
COMPOSITE.
Show route as:
NAVIGATION
for navigational data in the route display
(example on the previous page), or
POINTS for a list of route points
together with the points’ position in lat/lon and the XTE limit.
Place the cursor on the function you wish to change
0-9
Key in new figures, and…
+/-
toggle between available values
ENT
Confirm entry
5.2.1 Delete route via menu
MENU
Call up the menu bar, and…
3,2
load route display
+/-
Select the route you wish to delete
ENT
Press
[ENT]
to open for editing
WIN
Press [WIN] to delete route
CLR
Confirm
) Edit routes directly on the chart via info windows. Refer to section
3.3.4 and 3.3.5.
To Next Page
Loading...
Need help?
General
