54
|
Applying Software Updates | NSS Installation Manual
Select update to run
* 0: Cancel
1: “NSS-xxxx.upd”
Turn the rotary knob so that the asterix appears next to the update le. Press the rotary knob
to commence update. Do not remove the Micro SD card or repower the NSS until the process
is completed (this will typically take no more than a couple of minutes).
SimNet and Ethernet device updates
To update SimNet and ethernet devices select the Upgrade option presented when the le
is highlighted, followed by con rmation of the device you wish to upgrade. Do not interrupt
the upgrade process.
To Next Page
Loading...
