Singer
288
30
5. Twin-Needle Stitching
By using a twin needle, you can produce two parallel.
closely spaced decorative lines of stitching simultane-
ously. You can use either one or two colors of thread,
and you can choose either a straight-stitch setting or
any of the pattern discs.
When preparing to do twin-needle stitching, it is rec-
ommended that you wind an extra bobbin with the
thread you plan to use, for replacement in case the
bobbin should run out of thread.
(Note: When raising bobbin thread, hold both needle
threads.)
Inserting the Twin Needle
Before inserting the twin needle place the needle posi-
tion selector at (left) and stitch width selector at
( ).
1. Raise needle to its highest position.
2. Loosen needle-clamp screw-and remove single
needle
3. Insert twin needle into clamp with the flat side of
shank to the back.
4. Push needle up as far as it will go and tighten
needle e-c clamp screw.
To Next Page
Loading...
