Singer 288 - Inside Seams of Sheer Collars, Facings, and Cuffs; Seam Finishes

Singer
288
36
Inside Seams of Sheer Collars,
Facings, and Cuffs
• Pattern Disc: No. 1
• Stitch Width:
• Needle Position:
• Stitch Length: Between 0 and 1
• Special Purpose Presser Foot
• General Purpose Needle Plate
With a delicate hairline finish, seam allowances that
ordinarily show through can be eliminated.
1. Stitch along seam line.
2. Cut seam allowance away close to the line of
stitching.
3. Turn to the right side, gently roil out curved edges
with thumb and forefinger, and press flat.
Seam Finishes
• Pattern Disc: No. 1, 2. 37 or 350
to suit fabric
• Stitch Width:
• Needle Position:
• Stitch Length: 1 - 3 depending on choice
of stitch and fabric
• General Purpose Presser Foot
• General Purpose Needle Plate
• Trim raw seam edges evenly before stitching.
• Place stitching over the fabric edge.