Singer 288 - Needle Plates

Singer
288
8
NEEDLE PLATES
The general purpose needle plate on your machine
can be used with all presser feet.
The straight stitch needle plate is for use with the
straight stitch presser foot.
The feed cover needle plate is used for button
sewing. free-motion work, and darning.
Removing and Replacing Needle Plate
• Raise presser foot.
• Turn hand wheel toward you until the needle is in its
highest position.
• Open the slide plate. Lift needle plate up and to the
right until it snaps free.
• Insert new needle plate by placing it under the
clamping pin. push it gently to the left and press
down until it snaps into place.
• Close slide plate.