Singer 288 - Buttonhole Foot; General Purpose Foot; Presser Feet; Straight Stitch Foot

Singer
288
6
Accessories
PRESSER FEET
• Interchangeable snap-on presser feet:
General purpose foot on your machine
Straight stitch foot
Buttonhole foot
Zipper foot
Special purpose foot
• One-piece button foot
General Purpose Foot
The general purpose foot can be used for both straight
and zig-zag stitching.
Straight Stitch Foot
This foot, used for straight stitching only, should be
used when your fabric or sewing procedure requires
close control.
Buttonhole Foot
This transparent presser foot has guidelines to simplify
buttonhole placement and make it easy to gauge but-
tonhole length See instructions for making
buttonholes.
Zipper Foot
The zipper foot makes it easy to place stitching close
to a raised edge Thus, it is useful for corded seams
(page 70) as well as zipper insertion.
Special Purpose Foot
Use this transparent foot for zig-zag satin stitching and
for all kinds of decorative zig-zag stitching.
Button Foot
This short, open foot holds any two-hole or four-hole
button securely for stitching. For instructions on button
sewing, see page 86.