Singer 288 - Changing the Light Bulb

Singer
288
66
CHANGING THE LIGHT BULB
CAUTION: Disconnect power-line plug from electrical
outlet before removing old bulb.
Remove face plate.
Removing Bulb: Press bulb into socket and at the
same time turn bulb in direction shown to unlock bulb
pin. (Do not attempt to unscrew the light bulb).
Note: This machine is designed to use a 20 watt
maximum light bulb.
Press new bulb into socket with bulb pin entering slot
of socket and turn it in direction shown to lock bulb in
position. Replace face plate.