Singer 288 - Machine Settings; Straight Stitching; Zig-Zag Stitching; Threading the Needle

Singer
288
31
Threading the Needle
For best results, use No. 50 mercerized cotton thread.
Thread the machine in the same manner as For sin-
gleneedle stitching except:
1. Insert twin-needle spool pin under pattern disc lid.
2. Be sure that threads are separated by center
tension disc as they pass around tension assembly.
3. Pass only one thread through the last thread guide
before the needle.
Machine Settings
STRAIGHT STITCHING
• Stitch Width:
• Needle Position: only
• General Purpose Presser Foot
• General Purpose Needle Plate
• Speed: Moderate
ZIG-ZAG STITCHING
• Pattern Disc: Any zig-zag stitch
• Stitch Width: only
• Needle Position: only
• General Purpose Presser Foot (open patterns) or
Special Purpose Foot (satin stitching)
• General Purpose Needle Plate
• Speed: Moderate