1
USING THE SEAM GUIDE (N)
(Optional Accessory)
For extra help in keeping seams straight,
particularly for very narrow or very wide
seams, use the seam guide which comes
with your machine.
To attach the seam guide, place screw of
seam guide into the hole in the bed of the
machine, on the right side of slide plate
(1).
Line up the straight edge of the guide With
the needle plate guideline for desired
seam width and tighten screw.
INSERTING A ZIPPER
The zipper package will provide complete instructions for inserting zippers.
RECOMMENDED SETTINGS
Stitch Selection: Straight Stitch
Stitch Width: 11{
II I
Stitch Length: t.--'.--.'-4-'-'.,
Foot: Zipper (E)
Needle Plate: General Purpose (A)
• When zipper is to the left of needle,
attach left side of zipper foot to shank.
The needle will enter left notch of foot,
sewing close along zipper teeth.
II I II
20
• Attach right side of zipper foot to shank
when a zipper is to the right side of the
needle. The needle will enter right notch
of foot, sewing close along zipper teeth.
To Next Page
Loading...
