Singer 93234 - CLEANING THE MACHINE; BEFORE STORING YOUR MACHINE

CLEANING THE MACHINE
Your machine is designed to give you many years of dependable service. To ensure this
reliability, take a few minutes to keep the machine clean. How often you clean it depends on
how often you use it.
• Using the lint brush, remove lint or dust
from:
--presser bar
--needle bar
mbobbin case (if there is a lot of lint in this
area, remove the bobbin case for
cleaning)
--machine surface (if necessary, dampen
a soft cloth and use a mild soap to clean
the surface)
• Remove needle plate as instructed and
clean exposed area with a lint brush.
BEFORE STORING YOUR MACHINE
• To disconnect, turn all controls to off ("O")position, then remove
plug from outlet.
• Unplug foot controller from machine.
• Lower presser foot lifter.
• Turn handwheel to lower needle bar to the lowest position.
• Place your machine out of reach of children in safe, dry location.
42