Singer 93234 - WIZARD; RANDOM RIC-RAC STITCH; Hemstitching Applications; STRETCH OVEREDGE STITCH; Overedge Seam Finishing

WIZARD STITCH _ /RANDOM RIC-RAC STITCH
These stitches can be used for appliqueing, joining patchwork or forming decorative
hems on bed and table linens.
HEMSTITCHING
,_ • Fold a double hem of desired width and
\ __- baste.
\ • Mark a guideline for hemstitching on
right side of fabric just above top of hem
edge.
RECOMMENDED SETTINGS
Stitch Selection: Wizard/RandomRic-Rac
StitchWidth: I!1 1;
I1 I
Stitch Length: ° ....
Foot: Special Purpose (J)
Needle Plate: General Purpose (A)
Adjust balance, if necessary
• Place work, right side up with hem
facing, right, under presser foot.
• Lower presser foot and stitch along
guideline.
• Be sure stitches on left side of line fall
over hem edge (into single thickness of
fabric) and stitches on right side fall
into double fold of hem.
STRETCH OVEREDGE STITCH
With this stitch you can stitch and finish a seam in one step. It is also ideal for finishing
seams, hems and facings requiring stretch.
3O
OVEREDGE SEAM
• Trim seam edge 1/4" (6mm) from position
you wish your seam.
RECOMMENDED SETTINGS
Stitch Selection: Stretch Overedge
Stitch
Stitch Width: Ill
II I
Stitch Length: ° ' ' ' '
Foot: Special Purpose (J)
Needle Plate: General Purpose (A)
Adjust balance, if necessary
• Position trimmed seam under presser
foot, as shown.
• Straight stitches should fall on seam line;
zig-zag stitches should fall over seam edge.
• On 8 stitch machine you may create a
straight stretch stitch, as shown on page
28, by setting stitch width to the left.