ATTACHING OVEREDGE FOOT (Optional Accessory)
Used for overcasting edge of stretch fabrics to prevent fraying.
RECOMMENDED SETTINGS
Stitch Selection: Straight Overedge
Stitch
StitchWidth: I!I ,i
Stitch Length: t--'--.'--_-.-'.,
Foot: Overedge Foot
Needle Plate: General Purpose (A)
• Raise presser foot.
• Place trimmed edge of fabric under the
presser foot. Make sure the edge
against the wall of guide.
• Lower presser foot.
• Begin sewing slowing.
(See application: page 30)
I
ATTACHING ROLLED HEMMER FOOT (Optional Accessory)
Used for finishing bottom of skirts and blouse and edge of frills and handkerchief.
!
mm
RECOMMENDED SETTINGS
Stitch Selection:
Stitch Width:
Stitch Length:
Foot:
Needle Plate:
Straight Stitch or
Zig-Zag
IIl{i
II I
?.--'.--.'----.'4,
Rolled Hemmer Foot
General Purpose (A)
Cut away a corner of material in order
to make work easier.
Insert material into sprial groove in
hemmer foot until needle position
is reached.
Drawing ends of needle and bobbin
threads, turn handwheel 3 or 4 turns by
hand to guide material to hemmer foot.
27
To Next Page
Loading...
