Sinocare iCan i3 - Choose a Site

CGM User Guide
Section 2 Start Your Sensor 26
2.1.3 System Settings
The “
System Settings
” option under “
Settings
” button is where you
can change your account prole, such as password and email.
Changing the glucose unit of measurement used throughout the
APP (mg/dL or mmol/L)
Tap the “
System Settings
” button, select “
Unit of Measurement
”.
If you decide to use a di󰀨erent unit of measurement from the default
setting, you will see a conrmation message notifying that the unit of
measurement has been changed.