There is a flat area on one face of the sensor case where the SKF product marking is
placed. Below that is a small area that may be used by the customer to place their
own identification marking on the sensor, if this is required.
5.3.3 Gateway
On the front face of the case a manufacturing data label, Figure 43, confirms product
and company information, CE marking, WEEE marking and RoHS compliance. The
QR code contains the product information shown alongside it.
Note the QR code can be used to identify the gateway during commissioning.
Figure 43 Gateway labelling
5.4 Quality control
• SKF Sverige AB, Luleå and SKF (UK) Ltd, Livingston are ISO 9001:2015
certified.
To Next Page
Loading...
Need help?
General
