Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

CONTROLS, INSTRUMENTS AND EQUIPMENT
99
Position the rear portion of the belt guard over the retainer and
secure it using the retaining pin.
520002104-200
16) Spare Drive Belt Holder
A spare drive belt can be stored in a holder located on the
drive belt guard.
Note: The spare drive belt is not supplied with the snowmobile.
Position spare drive belt into drive belt guard slot.

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General

Brand	Ski-Doo
Model	REV G4 Trail/Crossover E-TEC Series
Category	Snowmobiles
Language	English