Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

TUNE YOUR RIDE
154
Front Suspension Adjustments
Ski Stance (If Equipped)
Ski stance can be set to different width.
Proceed as follows to change the stance setting:
1. Lift the front of vehicle.
2. Remove the ski bolt.
3. Place the spacer according to the desired stance. Refer
to tables and illustrations.
WARNING
Proceed to the same setting for both skis.
Models with Single Spacer
Ski Stance Settings - Single Spacer
Narrow
Place the spacer
on the inside of
the ski leg
Improve handling
in deep snow
Wide
Place the spacer
on the outside of
the ski leg
Improve stability
on trail

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General

Brand	Ski-Doo
Model	REV G4 Trail/Crossover E-TEC Series
Category	Snowmobiles
Language	English