CONTROLS, INSTRUMENTS AND EQUIPMENT
67
using it several times on first outing and whenever stopping
the engine thereafter. This engine stopping procedure will
become a reflex and will prepare operators for emergency
situations requiring its use.
WARNING
If the switch has been used in an emergency caused by
a suspected malfunction, the source of the malfunction
should be determined and corrected before restarting
engine. See an authorized Ski-Doo dealer for servicing.
7) Adjustable Handlebar Riser (If Equipped)
WARNING
Always stop engine before adjusting handlebar.
The handlebar can be set in four different positions.
To change handlebar position, pull lever and position handle-
bar as desired.
520001663-014_a
Move the handlebar back and forth to make sure mechanism
is securely engaged.
To Next Page
Loading...
Need help?
General
