Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

CONTROLS, INSTRUMENTS AND EQUIPMENT
64
mmo2009-005-006_a
TYPICAL — ENGAGE MECHANISM
Step 1: Apply and hold brake
Step 2: Lock brake lever using parking brake lever
To Release Parking Brake
Squeeze brake lever. Parking brake lever will automatically
return to its original position. Always release parking brake
before riding.
5) Engine Cut-off Switch (D.E.S.S. Post)
The engine cut-off switch, also known as D.E.S.S. post, is
located on the console.
The D.E.S.S. key must be securely snapped on the engine
cut-off switch to allow vehicle operation.
Note: After engine starting, 2 short beeps should be heard
if a programmed D.E.S.S. key (tether cord cap) is correctly
snapped on engine cut-off switch. If another beep code is
heard, refer to MONITORING SYSTEM for D.E.S.S. malfunction
codes information.
Pulling the D.E.S.S. key from the post shuts the engine off.

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General

Brand	Ski-Doo
Model	REV G4 Trail/Crossover E-TEC Series
Category	Snowmobiles
Language	English