MAINTENANCE PROCEDURES
180
Tightening Torque
Check plug
6 ± 1 Nm
(53 ± 9 lbf-in)
Reinstall the filler cap.
Drive Chain
Access to Chaincase
Open RH side panel, refer to CONTROLS, INSTRUMENTS AND
EQUIPMENT.
Drive Chain Adjustment
Using the Torx end of the driven pulley expander, GENTLY
turn tensioner clockwise to eliminate the play.
520001798-006_a
Do not force the tensioner in.
Note: Do not remove the hair cotter pin.
NOTICE Overtightening the drive chain could result in severe
damage to the chaincase components.