Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

CONTROLS, INSTRUMENTS AND EQUIPMENT
105
mmr2017-051-015_a
11. Remove the upper body module.
11.1 Grab the upper body module in the gauge support
section.
11.2 Pull the module forward.
11.3 Remove the module from the vehicle.
Upper Body Module Installation
1. At front, insert the upper body module tabs into the up-
per bottom pan openings.
mmr2017-051-016
2. Lower the rear end of the upper body module.

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General

Brand	Ski-Doo
Model	REV G4 Trail/Crossover E-TEC Series
Category	Snowmobiles
Language	English