EasyManuals Logo

Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

Ski-Doo REV G4 Trail/Crossover E-TEC Series
291 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #196 background imageLoading...
Page #196 background image
MAINTENANCE PROCEDURES
192
defective inserts or guides are noted; contact an authorized
Ski-Doo dealer.
Snowmobiles Equipped with Traction Enhancing Prod-
ucts
If your snowmobile is equipped with a BRP approved studded
track, PROCEED WITH A VISUAL INSPECTION OF YOUR
TRACK BEFORE EACH USE.
Look for any defects, such as:
- Perforations in the track
- Tears in the track (particularly around traction holes on
studded tracks)
- Lugs that are broken or torn off, exposing portions of rods
- Delamination of the rubber
- Broken rods
- Broken studs (studded tracks)
- Bent studs (studded tracks)
- Missing studs
- Studs that are torn off the track
- Missing track guide(s)
- Also, ensure that studs nut are tighten to the
recommended torque.
On approved studded tracks, replace broken or damaged
studs immediately. If your track shows signs of deterioration,
it must be replaced immediately. When in doubt, ask your
dealer.
WARNING
Riding with a damaged track or studs could lead to a loss
of control.
For complete information on traction enhancing products,
refer to TRACTION ENHANCING PRODUCTS in SAFETY
INFORMATION at the beginning of this Operator's Guide.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ski-Doo REV G4 Trail/Crossover E-TEC Series and is the answer not in the manual?

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General IconGeneral
BrandSki-Doo
ModelREV G4 Trail/Crossover E-TEC Series
CategorySnowmobiles
LanguageEnglish

Related product manuals