MAINTENANCE PROCEDURES
203
Unlock fuse block from its cover.
Fuse identification Amperage Rating
Start/RER 5 A
Battery 30 A
Accessories 25 A
Cluster 15 A
Fuse Inspection
Check fuse condition and replace it if necessary.
To remove fuse from holder, pull fuse out. Check if filament is
melted.
1. Fuse
2. Check if melted
WARNING
Do not use a higher rated fuse.
WARNING
If fuse has burnt out, source of malfunction should be de-
termined and corrected before restarting. See an autho-
rized Ski-Doo dealer for servicing.