SPECIAL SAFETY MESSAGES
18
SAFETY INFORMATION
- Always remove the tether cord cap from engine cut-off
switch when vehicle is not in operation in order to prevent
accidental engine starting, to avoid unauthorized use by
children or others or theft.
- NEVER stand behind or near a rotating track. Debris
could be projected causing severe injuries. To remove
packed snow or ice, stop engine, tilt and hold vehicle on
its side and use wrench tool on the belt guard.
- Do not stud the track unless it has been approved for
studs. At speed, a studded track that has not been ap-
proved for studs could tear and separate from vehicle.
See an authorized Ski-Doo dealer for current specific
studding availability and applications.
- You may stud the track on this vehicle model. However,
you MUST only use the BRP approved type stud for use
on Ski-Doo snowmobiles. DO NOT EVER use conven-
tional studs because the track thickness is thinner then
our standard tracks. The stud could tear off of track and
separate from vehicle.
- Always wear an approved helmet and follow the same
dressing guidelines as those recommended for the opera-
tor and described in this guide.
- Make sure that you are able to achieve a stable stance,
both feet resting positively on the footboards of footrests
with good grip, and that you are able to hold on firmly to
the handholds.
- Do not forget, with 2-UP models, the operator is responsi-
ble for the safety of the passenger. Always remember that
the snowmobile handling, stability and braking distance
may be affected when riding with a passenger.
- Before riding the vehicle, ask your passenger to inform
you to slowdown or stop immediately if he feels uncom-
fortable or insecure during the ride. Keep a watchful eye
on your passenger while riding.
To Next Page
Loading...
Need help?
General
