CONTROLS, INSTRUMENTS AND EQUIPMENT
81
Reset Stats
Using LOWER button, select RESET STAT and hold to reset.
Unit Selection
This multifunction gauge is factory preset in Imperial units but
it is possible to change it to Metric units.
Using LOWER button, Select UNITS to change the clock.
Setting Clock
Using LOWER button, Select CLOCK to change the clock.
1. Press LOWER button to select clock display.
2. Push and hold LOWER button for 1 second.
3. Press LOWER button to select 12:00 AM PM or 24:00
time base.
4. Push and hold LOWER button to acknowledge selection.
5. Press LOWER button to change hours (hours flash).
6. Push and hold LOWER button to acknowledge hour se-
lection.
7. Press LOWER button to switch to minutes (minutes
flash).
8. Push and hold LOWER button to acknowledge minutes
selection.
Setting Language
The gauge display language can be changed. Refer to an
authorized Ski-Doo dealer for language availability and to
setup the gauge to your preference.
To Next Page
Loading...
Need help?
General
