kg lb. kg lb. kPa psi
kg/m
2
psf
min* 2903 6400 1161 2560 1085 157.4 1007 206
max* 3960 8730 1584 3492 1209 175.41 1373 281
min* 3475 7661 1390 3064 1142 165.59 1205 247
max* 4189 9235 1635 3605 1250 181.36 1452 297
60442AE-CE
*
**
NOTE:
MODEL
6832
Total Machine Load
6826
Total Machine Weight
Wheel OUP**
min - Total machine weight with no options
max - Machine weight + all options + full capacity
The LCP or OUP that an individual surface can withstand varies from structure to structure and is generally determined by the engineer or architect
for that particular structure.
LCP**
LCP – Locally Concentrated Pressure is a measure of how hard the machine presses on the areas in direct contact with the floor. The floor covering
(tile, carpet, etc.) must be able to withstand more than the indicated values above.
OUP – Overall Uniform Pressure is a measure of the average load the machine imparts on the whole surface directly underneath it. The structure of
the operating surface (beams, etc.) must be able to withstand more than the indicated values above.
To Next Page
Loading...
