SKYJACK, Page 74
SJRT Compact Series
Engine Powered
10. Defective relay (31CR).
- Check relay. Replace if defective.
11. Loose or broken wire #31A from relay (31CR) to choke solenoid (CS-31A).
- Check continuity. Replace if defective.
12. Loose or broken wire #02 from engine harness to choke solenoid (CS-31A).
- Check continuity. Replace if defective.
13. Defective choke solenoid (CS-31A).
- Check solenoid. Replace if defective.
4.1-9. High Throttle Inoperative
NOTE
If machine is in drive mode and is elevated above high speed limit
switch, high throttle is inoperative.
1. Loose or broken wire #08 from LIFT/DRIVE select switch (S3) to LOW/HIGH throttle switch (S14).
- Check continuity. Replace if defective.
2. Defective HIGH/LOW throttle switch (S14).
- Check switch. Replace if defective.
3. Loose or broken wire #34 from LOW/HIGH throttle switch (S14) to relay (35ACR).
- Check continuity. Replace if defective.
4. Open diode (D09) “when in lift only”
- Check diode. Replace if defective.
5. Open diode (D44-2) “when in drive only”.
- Check diode. Replace if defective.
6. Loose or broken wire #35A from base terminal block (TB-1) to relay (35ACR).
- Check continuity. Replace if defective.
7. Defective relay (35ACR).
- Check relay. Replace if defective.
8. Loose or broken wire #02 from relay (35ACR) to terminal block (TB1).
- Check continuity. Replace if defective.
9. Loose or broken wire #34A from relay (35ACR) to relay (34ACR).
- Check continuity. Replace if defective.
10. Defective relay (34ACR).
- Check relay. Replace if defective.
11. Loose or broken wire #42 from relay (34ACR) to relay (10CR2).
- Check continuity. Replace if defective.
12. Defective relay (10CR2).
- Check relay. Replace if defective.
13. Loose or broken wire #2A from relay (10CR2) to relat (10CR1)
- Check continuity. Replace if defective.
14. Loose or broken wire #3A from base terminal block (TB1) to relay (32CR1).
- Check continuity. Replace if defective.
15. Defective relay (32CR1).
- Check relay. Replace if defective.
16. Loose or broken wire #43 from relay (32CR1) to relay (34ACR).
- Check continuity. Replace if defective.
17. Loose or broken wire #34B from relay (34ACR) to relay (33CR).
- Check continuity. Replace if defective.
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
