EasyManua.ls Logo

Skyjack Compact Rough Terrain Series - Page 9

Skyjack Compact Rough Terrain Series
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 1 - About Your Aerial Platform
SKYJACK, Page 9
SJRT Compact Series
Engine Powered
Safety Precautions (Continued)
Know and understand the safety precautions before going on to next section.
DO NOT operate on surfaces not capable of
holding the weight of the aerial platform including
the rated load, e.g. covers, drains, and trenches.
DO NOT operate an aerial plat-
form that has ladders, scaffold-
ing or other devices mounted
on it to increase its size or work
height. It is prohibited.
DO NOT exert side forces on
aerial platform while elevated.
DO NOT use the aerial plat-
form as a crane. It is prohibited.
DO NOT sit, stand or climb on
the guardrails. It is prohibited.
DO NOT climb on scissor arm
assembly. It is prohibited.
BE AWARE of overhead ob-
structions or other possible
hazards around the aerial plat-
form when driving or lifting.
DO NOT raise the platform
while the aerial platform is on a
truck, fork lift or other device or
vehicle.
BE AWARE of crushing haz-
ards. Keep all body parts inside
platform guardrail.
DO NOT lower the plat-
form unless the area below
is clear of personnel and
obstructions.
ENSURE that there are no personnel or obstruc-
tions in the path of travel, including blind spots.
BE AWARE of blind spots when operating the
aerial platform.
STUNT driving and horseplay are prohibited.
ENSURE ALL tires are in good condition and lug
nuts are properly tightened.
DO NOT alter or disable limit switches or other
safety devices.
DO NOT use the aerial platform without guard-
rails, locking pins and the entry gate/chain/bar in
place.
Go to Discount-Equipment.com to order your parts

Table of Contents

Related product manuals