ZB2044December 2007
Page 11
TM
Section 1 - About Your Telehandler Safety Rules
Safety Precautions (Continued)
Know and understand all safety precautions before going on to the next section.
• DO NOT exceed the maximum safe operating
slope.
• DO NOT use frame
leveling when boom
is elevated. It is
recommended that frame
leveling be used only
when boom is retracted
and in the lowered
position.
• DO NOT use the frame
leveling mechanism to
compensate for swinging
loads.
• DO NOT enter the danger area under or around
the boom when forks are off the ground or while
engine is running.
• DO NOT lower the boom
unless the area below is
clear of personnel and
obstruction.
• DO NOT elevate the boom
while the telehandler is on
a truck, forklift or other
device or vehicle.
• ENSURE that there are no
personnel or obstructions
in the path of travel,
including blind spots.
• BE AWARE of blind
spots when operating the
telehandler.
• ALWAYS Keep head,
arms, hands, legs and all
other body parts inside
the operator’s cab.
• AVOID jerks and sudden
stops.
• AVOID entanglement
with ropes, cords or
hoses.
To order go to Discount-Equipment.com
To Next Page
Loading...
