ZB2044December 2007
Page 71
TM
Section 2 - Operation Tables
P
F
R
NA
N/A P F R N/A P F R
222C
OPERATOR'S CHECKLIST
Serial Number:
Model:
Hourmeter Reading: Operator's Name (Printed):
Date:
Time: Operator's Signature:
Each item shall be inspected using the appropriate section of the Skyjack operating manual.
As each item is inspected, check the appropriate box.
- PASS DAILY
- FAIL FREQUENTLY
- REPAIRED QUARTERLY
- NOT APPLICABLE ANNUALLY
Visual and Daily Maintenance Inspections Function Tests
Labels Operator's Cab Controls
Electrical Test Horn
Safety Switches Test Reverse Alarm
Mirrors Test Positive Air Shutoff (If Equipped)
Hydraulic Test Lights
Cylinders Test Boom and Attachment Functions
Frame Test Frame Levelling and Level Indicator
Wheel/Tire Assembly Test Frame Level Lock
Drive Axle Test Accelerator Pedal
Steer Cylinder Assembly Test Driving and Service Brake Functions
Steer Linkage Test Steering
Batteries Test Parking Brake
Engine Air Filter Test Outriggers (If Equipped)
Engine Coolant
Muffler and Exhaust
Engine Compartment
Engine Oil Level
Fuel Leaks
Hydraulic Pump
Belts
Fuel Tank
Hydraulic Tank
Hydraulic Oil
Hydraulic Return Filter
Boom
Slide Pads
Chain
Boom Angle Indicator
Proximity Sensor
Transmission
Lifting Attachment
Pedals
Manual
Operator's Cab Controls
Grease Fittings
Grease Fittings on Frame
Grease Fittings on Boom Assembly
Operator's Cab
ROPS/FOPS
Seat
Note:
Make a copy of this page or visit the Skyjack web site:
www.skyjack.com for a printable copy.
q
q
q
q
Table 2.6 Operator’s Checklist
To order go to Discount-Equipment.com
To Next Page
Loading...
