Skyjack ZB2044 - Transmission

ZB2044December 2007
Page 31
TM
Section 2 - Operation Visual and Daily Maintenance Inspections
• Fuel Tank
IMPORTANT
Before using your telehandler ensure
there is enough fuel for expected use.
- Ensure fuel ller cap is secure.
- Ensure tank shows no visible damage
and no evidence of fuel leakage.
• Hydraulic Tank
- Ensure hydraulic ller cap is secure.
- Ensure tank shows no visible damage
and no evidence of hydraulic leakage.
• Hydraulic Oil
- Be sure that the boom is in the stowed
position, and then visually inspect the
sight gauge located on the side of the
hydraulic oil tank.
- The hydraulic oil level should be between
the minimum and maximum marks on
the sight glass. Add oil as needed. Refer
to Table 2.4 for recommended oil type.
• Hydraulic Return Filter
- Ensure lter element is secure.
- Ensure there are no signs of leakage or
visible damage.
2.8-9 Transmission
- Ensure transmission shifter is working
properly and there is no evidence of damage.
• Check oil level on dipstick
- Oil level should be in the “safe” zone.
Add oil as needed. Refer to Table 2.4 for
recommended oil type.
Fuel Tank
Hydraulic Oil
Tank
To order go to Discount-Equipment.com