SMA DATA MANAGER M - Page 28

5 Mounting
SMA Solar Technology AG
Operating manualEDMM-10-BE-en-2728
Procedure:
1. Place the product onto the DIN rail from above and
hook it into place.
2
1
enne
xOS
DA
TA MANAGER
☑ The product snaps audibly into place.
2. Ensure that the product is securely in place.
Mounting the Product on the Wall
1. Press the four brackets on the back side of the
Product out from the inside.
☑ The brackets snap into place.
2. Mark the drill holes using the brackets as a template.
3. Drill the holes and insert the provided screw anchors. Do not drill through the brackets.
4. Insert the provided screws through the brackets and
tighten. Do not damage the brackets.
enne
xOS
DA
T
A MANA
GER
5. Ensure that the product is securely in place.