SMA DATA MANAGER M - Page 42

7 Commissioning
SMA Solar Technology AG
Operating manualEDMM-10-BE-en-2742
Procedure:
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Register as a new user in SunnyPortal or log into SunnyPortal as an existing user.
3. Create a new system or add product to an existing system.
Register as a new user in SunnyPortal.
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Select I require a user account.
3. Enter the necessary data for registration.
4. Select [Register].
☑ After a few minutes you will receive an e-mail containing a confirmation link for
registration in SunnyPortal.
5. If you have not received an e-mail from Sunny Portal, check whether the e-mail has been
redirected to a folder for junk mail or whether an incorrect e-mail address has been entered.
6. Follow the confirmation link in the e-mail within 48 hours.
☑ SunnyPortal opens a separate window to confirm successful registration.
7. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
8. Enter the e-mail address and the SunnyPortal password in the fields User and Password.
9. Select [Login].
Log in to SunnyPortal as an existing user.
Requirement:
☐ You must have access to a user account in SunnyPortal, SunnyPlaces or SunnyDesign.
Procedure:
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Enter the e-mail address and the SunnyPortal password in the fields User and Password.
3. Select [Login].
Create new PV system
The system setup assistant is a step-by-step guide to the processes required for the registration of
your system in SunnyPortal.
Service access
To ensure a better quality of service, activate the switch for service access during registration.
Procedure:
1. Log into SunnyPortal.
2. Select the menu Configuration.
3. Select [Create system] in the context menu.
☑ The system setup assistant opens.