Procedure:
1. Select the configuration option Adopting configuration from a file.
2. Select [Browse...] and select the desired file.
3. Select [Import file].
Configuration with the Installation Assistant (Recommended)
Figure 9: Layout of the installation assistant
Position Designation Description
A Configuration steps Overview of the installation assistant steps. The number of
steps depends on the type of device and the additionally
installed modules. The current step is highlighted in blue.
B User information Information about the current configuration step and the
setting options of the configuration step.
C Configuration field You can make settings in this field.
Procedure:
1. Select the configuration option Configuration with Installation Assistant.
☑ The Installation Assistant will open.
2. Follow the Installation Assistant steps and make the settings appropriate for your system.
3. For every setting made in a step, select [Save and next].
☑ In the last step, all made settings are listed in a summary.
4. To save the settings to a file, select [Export a summary] and save the file on your computer,
tablet PC or smartphone.
7 Commissioning
SMA Solar Technology AG
Operating Manual 41SB15-25-1VL-40-BE-en-11
To Next Page
Loading...
