Posi-
tion
Designation Description
C Help Provides the following functions:
• Displaying information on Open Source licenses used
• Link to the website of SMA Solar Technology AG
D Status bar Displays the following information:
• Inverter serial number
• Inverter firmware version
• IP addresses of the inverter within the local network and/
or IP address of the inverter during WLAN connection
• With WLAN connection: Signal strength of WLAN
connection
• User group logged in
• Date and device time of the inverter
E PV power and power
consumption progres-
sion
Temporal progression of the PV power and the power con-
sumption of the household over the selected time period. Please
note, the power consumption will only be displayed if an en-
ergy meter is installed in the PV system.
F Status display The various areas display information on the current status of
the PV system.
• Device status
Displays whether the inverter is currently in a fault-free
operating state or whether there is an Error or Warning
present.
• Current power
Displays the power currently being generated by the
inverter.
• Current consumption
Displays the current consumption of the household if an
energy meter is installed in the PV system.
• Yield
Displays the energy yield of the inverter.
• Consumption
Displays the energy consumption of the household if an
energy meter is installed in the PV system.
• Feed-in management
Displays whether the inverter is currently limiting its active
power.
8 Using the Inverter User Interface
SMA Solar Technology AG
Operating Manual 49SB15-25-1VL-40-BE-en-11
To Next Page
Loading...
