Operating the Sunny Island SMA Solar Technology AG
104 SI2012_2224-TEN082311 Technical Description
8. Confirm the password. Press the
pushbutton.
The password is confirmed.
Operating level [1] = installer level has
been set.
9. Leave menu.
Changing the operating level
If the password is invalid, the Sunny Island does not switch to the installer level. In this
case, recalculate and re-enter the installer password as described in this section.
The installer level is reset to the user level if
• the Sunny Island is switched off and on again
• specific parameters are entered (e.g., the "510.01 InvRs" parameter) that cause a
restart
• a wrong password is entered
• if no activity takes place within five minutes
PW:21 Level[1]
OnTmh
123456 [h]
260# Set Password
250# Set System
260# Set Password
[<-- back]
[<-- home]
To Next Page
Loading...
